Think safety first
If the problem presents a safety hazard, replacement is a no-brainer. For example, if your furnace has a cracked heat exchanger—the metal wall between the burning fuel and the air it’s heating—poisonous carbon monoxide gas could work its way into the household air supply, something you don’t want to risk. Other problems, like faulty electronics and stuck valves, can be repaired, which means you’ll need to do a cost-benefit analysis.
Consider the typical lifespan
A 2013 study by the National Association of Home Builders and Bank of America found that furnaces for forced-air systems last an average of 15 to 20 years; boilers for hot-water radiators and baseboards last 13 to 21 years. So start by dating your system. Some technicians write the year the equipment was installed directly on the unit. Otherwise, when the machine is off and cool, look for a metal identification plate, usually on the inside of chamber door. Record the model and serial numbers from the plate, then call the manufacturer’s customer service number to get the date of manufacture.
Keep in mind that a 25- or even 30-year-old system isn’t necessarily ready for the scrap heap. The published lifespans are averages, which means half of all systems are spent by that time, and the other half are still working well. Use these numbers as ballpark guidelines only, suggests Gopal Ahluwalia, the NAHB study’s lead researcher.
Assess the costs of repairing versus replacing
To decide your system’s fate, you need more data: the cost of your repair or replacement options, which your service provider can give you. Depending on the size of your house and the brand of new equipment you choose, a new hot-air furnace typically costs $1,500 to $4,000, while a boiler for a hot-water system might run $4,000 to $8,000.
As a general guideline, consider replacement if the equipment is beyond three-quarters of its life expectancy and repairs will cost more than a third of replacement. It’s probably not worth spending $700 to repair a 15-year-old furnace you could replace for $2,000.
Consider your heating plant’s efficiency
In these days of high fuel costs and concerns over our carbon footprints, you should also consider your heating plant’s efficiency. Its Annual Fuel Utilization Efficiency number (AFUE) measures the percentage of the fuel that’s converted to heat rather than being lost up the chimney or through other inefficiencies.
“If your system is 20 years old, its AFUE is probably about 70%,” says experts. Today’s minimum AFUE is 80%, which means you’ll burn 10% less fuel—and therefore spend 10% less money on your heating bills. You can go as high a 95% AFUE with new equipment, dropping your bills a whopping 25%. That kind of efficiency raises your equipment costs to $3,500 to $6,000 for a furnace and $8,000 to $10,000 for a boiler, but will also earn you a tax credit of up to $300 from the federal government. And there are many incentives.