When should I use a plumbing snake?

Always try to plunge away your problems first. Plungers are a little easier to use than plumbing snakes and they can handle most clogs, so it’s always your best first step to try the trusty plunger. When that doesn’t work, then it’s time to move on to the bigger guns: Your plumbing snake.

What is a plumbing snake anyway?

A plumbing snake allows you to dislodge clogs that are located deeper in the plumbing pipes that plunging simply won’t help. The snake is a flexible cable that is attached to a spool which you unwind using a hand crank. You can find plumbing snakes up to 100’ long but homeowners are fine with a 25’ model.

Ok, so how do I use one?

Plumbing snakes are very easy to use. Simply insert one end of the snake into your toilet or drain and slowly feed the cable down the pipe. After you’ve fed it a few inches, you can use the crank to force the cable deeper into the pipe. You’ll notice it becomes harder to advance the cable once the clog is reached, but keep trying to feed the cable until you can’t anymore. Once you’ve gotten as far as the snake will go, gently wiggle the cable side-to-side before slowly winding it back up. The snake may grab the clog and bring it up, or you may need to repeat this motion a few times in order to push the clog down the drain. Flush the drain with fresh water periodically to encourage the clog to drain.

If you still have any questions or concerns regarding any of your HVAC or plumbing needs call Green Apple toll-free at 888-611-7191

Comments 0

Leave a Comment