Why Fall Is An Optimal Time For A Furnace Inspection

  • Prolong the life of your system – By scheduling a furnace tune-up every fall, you can increase the lifespan of the unit by 30-50% or more. The average life expectancy of a furnace is around 12-20 years; if not maintained, it may not even last 10 years. With professional maintenance, you can easily double the lifespan of the average furnace. Compared with the price of a new furnace, annual service is a no-brainer.
  • Keeps system running as efficiently as possible – By having routine maintenance tune-ups, you can increase the efficiency of your system upwards of 25%. And efficiency means your system is being energy-efficient and cost-effective. This is good for your wallet and the environment.

You wouldn’t wait years to get your car serviced, so why would you neglect annual furnace maintenance? Save money, energy, time, and frustration by scheduling fall furnace maintenance. Green Apple Mechanical are the experts you can trust. We have been serving the NJ area for years with professionalism and expertise. If you have any questions or concerns regarding any of your HVAC or plumbing needs call Green Apple toll-free at 888-611-7191

How To Repair This Common Toilet Concern

Partial or Slow Flushing

A partial flush or slow, poor performance flush could indicate several things, some of which can be assessed on your own with a little DIY toilet bowl know-how, and some of which require the intervention of a trained plumbing specialist.
A partial flush is usually the result of an over-saturated or faulty flapper valve (essentially, the opposite of a poor flapper seal, which is the leading cause of running toilet problems). When a flapper valve becomes over-saturated, it closes over the water flow pipe prematurely, cutting off flow to your bowl. If your valve closes before roughly 80% of the tank’s water has been flushed through your bowl, it’s probably time to replace your valve.
Matters may be more serious if your toilet is flushing slowly, as opposed to partially. A slow flush is usually a sign of clogging or obstruction somewhere in your plumbing pipes. To test if your toilet’s drain pipes are clogged, fill your toilet bowl with a five-gallon bucket of water and flush as quickly as possible. If the flush uses greater force, your pipes are probably fine; however, if the flush retains the sluggish, poor speed as before, there is most likely a clog somewhere in your plumbing obstructing flow.
In these circumstances or any of the others mentioned in this post, it’s important to not hesitate when professional repairs are needed. Doing so can wind up costing you far more than necessary, or cause further damage to your home’s plumbing. Contact Green Apple Mechanical NJ to evaluate and repair your broken, clogged or poor performing toilet can end up saving you hundreds in high water bill or later repair costs.
If you have any questions or concerns regarding any of your HVAC or plumbing needs call toll-free at 888-611-7191

Two Simple And Safe Ways To Unclog A Drain

Unclogging with Baking Soda and Vinegar

Some clogs can be resolved without the use of harsh chemicals. Using baking soda and vinegar to clear a drain clog is a more environmentally friendly way to get the job done. In addition, it is safer for children and pets, and costs less than commercial products.
To clear a drain with this method, first, pour a pot of boiling water down the drain. Next, pour one cup of baking soda down the drain, immediately followed by a solution of one cup of water and one cup of vinegar. Cover the drain with a plug and wait five to 10 minutes. Then, flush the drain with boiling water once again.
Unclogging Manually
It is also possible to clear a drain manually using a pipe snake or other plumbing tool. These are long, bendy tools that can be inserted into a pipe from the drain end and maneuvered around inside to catch any debris within. Small versions of these tools are often sold with chemical drain cleaning agents. You can also purchase them at a hardware or home improvement store.
Another method for clearing a drain is to use a plunger, in the same manner, you would in a toilet. Repeated pressure on the top of the drain can sometimes work wonders on basic clogs.
If these solutions don’t work and you still have questions or concerns regarding any of your HVAC or plumbing needs call toll-free at 888-611-7191

How To Extend The Life Of Your Furnace

With cold weather soon to be upon us it’s very important to think about scheduling your furnace inspection. An annual inspection ensures that your furnace will work when you need it and prevents costly emergency repairs and health risks in your home.
Having your furnace inspected or “tuned up” gives your Green Apple technician an opportunity to check for possible issues and correct them before they turn into problems (or emergencies). Here are some reasons why you should schedule your furnace inspection now.

Prolong the Life of Your Furnace

The longer you put off having an annual inspection done on your furnace, the more likely you’re going to have a breakdown (usually when you need your furnace the most). During an inspection, a trained Green Apple technician may very well find small problems that if left unchecked could result in a major repair. Annual maintenance on your furnace guarantees that all the parts in your furnace work together to heat your home safely and reliably for years to come.

Prevent Carbon Monoxide Leaks

When the heat exchanger in your furnace becomes cracked, gases like carbon monoxide can escape into your home.
Carbon monoxide is colorless, odorless, and potentially deadly. For your family’s safety, it’s important to inspect your furnace regularly to prevent carbon monoxide poisoning. It’s also wise to install a carbon monoxide detector outside of each bedroom to protect and alert family members.

Clean Built-Up Rust and Dirt

A proper inspection includes checking for rust and dirt that can build up on the burners in your furnace. This type of buildup can create pockets that trap gas and cause hot spots on your furnace’s heat exchanger.
Even if your furnace is new, it still requires inspection as different factors can cause rust and dirt to accumulate. Call Green Apple Mechanical with any questions or concerns you may have @ 888-611-7191

Think Before You Flush

While tree roots and fats, oils, and grease (FOG) have always been causes of sewer backups, in recent years sewer agencies around the country are dealing with the problem of flushable wipes.
Companies have been marketing these products as “flushable” over the last few years, but wastewater professionals are finding out these products are not safe for sewage systems.
Flushable wipes are supposed to be biodegradable and break up like toilet paper, but they don’t.
These wipes do not disintegrate. They can cling to the interior walls of pipeline and/or get hung up on snags inside the pipes. They accumulate in pump stations and can clog and pumps. De-ragging pumps and unclogging pipes are labor intensive and increase the cost of maintaining your sewer system.
Examples of products that you should not flush include:

  • paper towels
  • diapers
  • baby and cleaning wipes
  • sanitary napkins/tampons
  • condoms

Do not flush any items that are not designed to disintegrate like toilet paper when flushed. If you have any questions or concerns call Green Apple Mechanical NJ toll-free at 888-611-7191

Do You Have To Shut Your Faucet Off Too Tightly?

When a conventional washer-type faucet has to be excessively tightened down each time you shut it off in order to keep it from dripping, or when the faucet develops a drip that won’t stop no matter how hard you tighten it, then prompt repairs are advisable to keep things from getting worse – for example, to keep from damaging the faucet seat and possibly causing extensive damage to the faucet stem itself.

Most leaks can be repaired by taking the faucet apart and then installing a new washer at the end of the spindle, as well as replacing the packing or O-ring that goes around the outside of the stem in some cases. However, if you wait too long and keep trying to tighten the faucet down harder in order to stop the drip, then chances are that the valve seat will be damaged. The reason is that when you turn the handle on a washer-type faucet to shut off the flow of water the threaded spindle or stem screws its way down into the faucet body and presses the rubber washer on the end of the stem down against the metal valve seat inside the faucet body, thus closing the opening and shutting off the flow of water.

If this still doesn’t work then we advise calling the professionals here at Green Apple Mechanical. Call toll-free at 888-611-7191

How To Improve Your HVAC System This Fall

Fall HVAC Maintenance Tip #1: Replace your Air Filter

It’s good to be in the habit of switching out your air filters at least every 90 days—and more frequently if you have pets or allergies. Clogged filters force your furnace work harder, which translated into higher utility costs for you. Plus, your air quality will be better when it’s not being pulled through a filthy filter.

HVAC Maintenance Tip #2: Reverse Your Ceiling Fans

We all know that warm air rises. To extend the life of your furnace, it’s helpful to push that warm air down into the room. In cooler months, your ceiling fans should be turning clockwise at a low speed, drawing the cool air up and forcing the warm air down along the walls and back to your floors.

Maintenance Tip #3: Clean and Adjust Registers and Vents

Continuing along the hot-air-rises theme: If you have a two-story home, consider closing some registers on the second floor and opening more on the first floor. While you’re at it, take the dustbuster to your floor and ceiling registers and wall vents.

Tip #4: Adjust Your Thermostat

We recommend setting your heat at 68oF while you’re home and awake and pushing it down a few degrees if you’ll be away for several hours and while you’re sleeping. Not only will this save wear and tear on your HVAC unit, but it will also save you some money over time.

#5: Have your HVAC Unit Inspected

There are plenty of preventive measures you can do yourself, but some tasks are best left up to people who know their heat exchangers from their draft inducer motors. By hiring a Green Apple professional to come to check your system—twice per year, ideally—you’ll lessen the chance of a major failure. We will inspect your filter, electrical components, motors, pressure, and more. (We’re pleased to offer affordable preventive maintenance plans to homeowners.
If you have any questions or concerns regarding any of your HVAC or plumbing needs call toll-free at 888-611-7191

All Your HVAC Questions Answered

You’ve probably heard that you need to have your heating and cooling system (HVAC) serviced regularly. But how often do you need to have an HVAC tune-up and what maintenance is really necessary? We will answer these questions here.
Is Regular HVAC Maintenance Really Necessary?
If your HVAC system isn’t experiencing any obvious problems such as weird noises, you might think you can skip on the HVAC maintenance. But saving on the HVAC service costs now can end up costing you a lot later on.
Routine HVAC maintenance and tune-ups is meant to help prevent breakdowns later on. Breakdowns can be expensive to fix, especially when you’ve got to order a specialty replacement part. Aside from preventing breakdowns, routine HVAC servicing will help your unit last much longer.

Another important part of HVAC maintenance is to make sure your system is running efficiently. HVAC systems account for nearly half of all energy bills, so it is alarming to hear that most HVAC systems are losing about 20-30% of their efficiency from just leaks. They lose more efficiency from other problems like old thermostats which aren’t regulating temperatures properly and dirty air filters.
If you haven’t had your HVAC system inspected and you have some questions or concerns regarding your HVAC system or your plumbing call Green Apple Mechanical NJ

Look Out For Hidden Leaks

One common misconception or myth that is the unfortunate root cause behind the bitter fact that so many homeowners pay substantial utility bills every year. Only in certain circumstances are leaks visible and normally, this depends on the location of the leak as well. Plumbing connectors have pipes underground and behind the drywall as well, so if there is a leak then it will only be visible if the leak has caused considerable damage. Pipe leaks will gradually find its way to the drywall and will chip away the paint ruining the interior.
If you suspect that you might have a hidden leak in your home then be sure to give Green Apple Mechanical a call. We are the experts you can trust. We have been serving the NJ area for years with professionalism and expertise. Contact us if you have any questions or concerns regarding any of your HVAC or plumbing concerns.

New Season, New Furnace Filter

All the heated air that flows from your furnace into the living spaces of your home must first pass through an air filter. If the filter is dirty, more polluted air will enter your home. Air filters don’t just help to improve the air quality in your home, they protect your heating system equipment from damage, too. The Environmental Protection Agency calls changing dirty furnace filters the most important maintenance task for optimizing your heating system’s energy efficiency.

BENEFITS OF REGULARLY CHANGING YOUR AIR FILTER

Energy savings, lower utility bills, and better indoor air quality are the three greatest benefits that you’ll enjoy when you replace your dirty furnace filters. An understanding of the role that air filters play helps explain why they’re so important:

  • Airflow. Even the most energy-efficient furnace can’t keep your home snug and warm without a well-operating air distribution system. If an air filter becomes so clogged and dirty that it restricts airflow, the system will have to work harder to get conditioned air through the ductwork. Dirt can also accumulate on the coils and further restrict airflow.
  • Heater performance. Dirty filters can cause dust, grime, and debris to build up on heater components, which can impair the efficiency of the entire heating system. Over time, the heater’s performance weakens while the energy usage steadily increases. Replacing a clogged filter can lower an HVAC system’s energy consumption by as much as 15 percent.
  • Green Apple Mechanical are the experts you can trust. We have been serving the NJ area for years with professionalism and expertise. If you have any questions regarding any of your HVAC or plumbing needs call toll-free at 888-611-7191